Basic Info.

Max.Head	>150m	Max.Capacity	>400 L/min
Driving Type	Motor	Impeller Number	Single-Stage Pump
Working Pressure	Middle Pressure Pump	Influent Type of Impeller	Single Suction Pump
Position of Pump Shaft	Horizontal Pump	Pump Casing Combined	Horizontal Split Pumps
Mounting Height	Suction Centrifugal	Impeller	Closed
Usage	Pump, Pumps, Condensate Pump, Circulating Pump	Standard	API610
Transport Package	Plywood Box	Specification	1000.00cm * 2000.00cm * 1000.00cm
Trademark	haishi	Origin	Jiangsu, China
HS Code	8413709990	Production Capacity	5000

Products Description

ZA ZAO Series petrochemical process pumps are designed and manufactured in accordance with API 610 (8th edition).

Scope of application
For transporting clean or slightly granular, cold or hot, chemically neutral or corrosive liquids.
Main use
It is used in oil refineries, petrochemical industry, coal processing and cryogenic engineering.
It is used in the chemical industry, the fiber industry and the general processing industry, especially in the paper and pulp industry and the sugar industry.
It is used in the water industry, especially in desalination plants.
Used in heating and air conditioning systems.
Used in fossils and nuclear power plants.
Used in protection projects.
It is used in the Marine and Marine industries.

Operational data
Size: 25-400mm
Flow rate (Q) : up to 2600 m/h
Head (H) : up to 250m
Operating pressure (P) : up to 2.5Mpa
Operating temperature (t) : -20ºC +180ºC
Center support line temperature: -20ºC~+450ºC

product-1060-1318

product-1060-1333

Mixed Flow Centrifugal Pump: Main Products and Applications

A Mixed Flow Centrifugal Pump is designed to handle fluids with both axial and radial flow components, providing a balance between the characteristics of centrifugal and axial flow pumps. It is commonly used in applications where moderate pressure and high flow rates are required.

What Is Mixed Flow?

In a mixed flow pump, the fluid enters the pump axially (along the shaft) and exits with both axial and radial components, combining the features of both axial and centrifugal pumps. This design allows the pump to handle large volumes of fluid at moderate pressures. The "mixed" flow refers to the combination of both flow directions within the pump, providing greater efficiency in specific conditions compared to purely centrifugal or purely axial flow pumps.

Main Products Handled by Mixed Flow Centrifugal Pumps

Water: Mixed flow pumps are often used to move large volumes of water for municipal water systems, irrigation, and cooling applications.
Sewage and Wastewater: These pumps are effective in handling wastewater and sewage, especially in large-scale treatment plants where moderate pressure and high flow are required.
Chemicals: They can be used in chemical processing industries to transfer moderate concentrations of chemicals and slurry-like substances.
Oil and Petroleum Products: Mixed flow pumps are used in oil refineries and petrochemical industries to move products such as crude oil, refined fuels, and other fluids with low to medium viscosity.
Agricultural and Industrial Fluids: The pump is commonly used for irrigation, draining, or moving fluids in industrial applications that require high-volume transfer without high-pressure requirements.

Applications of Mixed Flow Centrifugal Pumps

Water treatment plants and municipal water supply
Agricultural irrigation systems and drainage
Chemical processing and slurry handling
Flood control and dewatering applications
Cooling water circulation in industrial applications

Advantages of Mixed Flow Centrifugal Pumps

Higher flow rate at moderate pressure compared to centrifugal pumps
Efficient for transferring large volumes of fluids
Versatile in handling a wide range of fluids, including water, sewage, and light chemicals
Relatively simple design with fewer maintenance needs